WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Free return shipping is available for all orders shipped within the 48 contiguous United States. These orders will include a complimentary pre-paid UPS Ground return label in the box when the order is delivered. If you use the pre-paid return label provided, please allow 7-10 business days for the return package to arrive back at Tackle Warehouse.
Orders shipped to international, APO/FPO, Alaskan or Hawaiian addresses or U.S. territories are not eligible for the free return shipping offer. Drop Ship and Oversized Items are not eligible for the free return shipping offer.
Please use our Returns & Exchange form found on the back of your printed invoice. If you don't have your original invoice you can download our Tackle Warehouse Return Form.
Contact us with any questions or concerns!
Phone: 1.800.300.4916 Email: info@tacklewarehouse.com
Tackle Warehouse wants you to be completely satisfied with your purchase. Items can be returned at any point in new condition within 365-days of the original invoice date.
Products returned in new, store-bought condition are eligible for exchange, refund, or Tackle Warehouse store credit for the full value of your purchase.
Please note that while we want you to be happy with your purchases, an excessive number of returns within a twelve-month period may limit your eligibility for refund or store credit.
Products returned beyond 365-days from the original invoice date or that are unable to be returned to stock may be eligible for store credit at the sole discretion of Tackle Warehouse.
Original shipping charges are non-refundable.
Used baits & tackle are not eligible for return.
From the makers of the Equalizer Trolling Motor Assist System comes the T-H Marine G-Force “The Eliminator” Prop Nut. Offering several advantages over stock propeller nuts, the T-H Marine G-Force “The Eliminator” Prop Nut is built to make your trolling motor perform better, longer, and quieter.
Designed to lessen prop noise and vibration, the T-H Marine G-Force “The Eliminator” Prop Nut stabilizes the prop by providing a larger contact point. In addition, the T-H Marine G-Force “The Eliminator” Prop Nut also acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life. Made to fit most Minn Kota and Motorguide trolling motors, the T-H Marine G-Force “The Eliminator” Prop Nut comes in an assortment of colors to provide a sleek, matching aesthetic. Make sure that you're getting the most out of your trolling motor with the T-H Marine G-Force “The Eliminator” Prop Nut.
Please Note: -Will not work with Kipawa and Hydrilla Hacker Props.-Standard Minn Kota Prop Nuts are designed for Minn Kota models that are 80lb thrust and above. (Will not fit 75lb thrust motors and lower)-For Minn Kota models with 75lb of thrust and lower - use the Minn Kota 35-75lb Prop Nuts
Key Eliminator Benefits:
-Machined from 6061 Billet Aluminum-Specific Durometer O-ring dampens noise/vibration and secures nut-Wider contact area for a more stable prop-Cooling ports aid in heat dissipation-Anodized protected-No tools needed-Available in popular colors-Visually appealing-Patent pending
Actual finishes may vary due to anodizing process.
Comments: I own a Edge 45Lbs trolling motor and I was suspicious by the efficiency of this product with such small trolling motor. But one can really feel the difference in term of vibrations reduction. I have a Maxxum 55 and I will buy a second one as well as others T-H Marine products.
From: Jerome: Paris, France 8/31/22
Comments: I purchased one of these for my Ghost and though it made removing the prop easier for cleaning, I noticed chatter when at high speed. Once off of the water I found the prop had wiggle even with it as tight as possible. I called TH Marine and they acknowledged an issue with some nuts for the Ghost and sent me a replacement. It was the same. They then said that there was new production coming in 4 weeks and they would send a replacement then. After 6 weeks I called them back at which time they sent another tested nut. It was the same. I spent some time and took videos to show them what the issue was. Their tech support person said to wait for the new models coming out "some time after January" and this is September. I asked to talk to the design people about the issue and was told they were too busy. So I have 3 non-functional prop nuts and am using my factory nut and washer. What a waste of time. I would suggest not ordering one for a Ghost as they don't seem to know or care that there is an issue, especially since they are still for sale on Tackle Warehouse.
From: Brian: Santa Maria 9/22/21
Comments: The color fades fast!From: Unknown: 9/25/19
Comments: I put Eliminator on my Minn Kota trolling motor, 107 36 volt. Works fine but it has corroded really bad around the entire nut. Why? Anyone else have this issue? Lols awful. Anyway to get the corrosion off and repaint?
From: Greg 7/29/19
From: Unknown 3/13/18
Comments: It really works! Had a slight vibration in my fortrex above 50%, installed Eliminator prop nut and vibration is gone all the way to 100%. Expensive but worth it.
From: beardface iowa 7/22/17
Comments: I have owned two of these (one for a 55 lb and the latest for a Minn Kota 80 lb Terror). This product makes a big difference in the amount of vibration and it really does dampen the noise. It just runs smoother with this product added. On an aesthetic note, it looks great as an accent to the red on my boat seats and motor.
From: Rodney: Gainesville, GA 12/31/16
Comments: Put it on my minn kota fortex 112 it took almost all vibration out of the motor it's running smoother than it did when I first bought it last year this is absolutely a must have will not run a trolling motor workout out one now that I've had one! This thing is amazing a must have!
4/16/16
Comments: It is compatible with the weedless wedge 2 on a minn kota 80lb-very fast shipment!
From: Scott: Melbourne, FL 1/29/16
Comments: I did not notice anything on my minnkota maxxum as far as any vibration or noise reduction, it is not worth the money at all in my opinion, unless you are buying it for the looks. I use a GoPro camera on my windshield and it picks up sound very, very well. In listening/watching my videos after installing this, it sounds exactly the same throughout the hull up to the camera. In theory this should work given the design, but it just didn't change anything for me at all.
From: Jeremy: MN 10/13/15
Comments: The eliminator does reduce vibration and sound. Although the improvement was not huge, it was definitely an improvement.
From: Scott: AR 9/15/15
Comments: Usual T-H Marine quality. Not sure about the previous comments but I have a Minn Kota Fortrex with Weedless Wedge 2 & it fits perfectly. Exact fit. I like the weight and balanace it adds to the prop. Awesome product and good value.
From: Stu: Lake Wylie, SC 9/11/15
Comments: Awesome product was kind of skeptical at first but took a chance and glad that I did my trolling motor has never been so quiet.
From: Joey: Ringgold, VA 8/1/15
Comments: Not compatabile with Weedless Wedge 2 FYI, had to use a dremel tool to sand down the inner portion of my trolling motor prop i/o for it to fit.
From: Chris: Savannah, GA 6/29/15
Comments: The Eliminator Prop Nut does EXACTLY what the manufacturer says it will. It makes your trolling motor whisper quiet! Well worth the money.
From: Mike: Dinwiddie, VA 1/14/15